Skip to content

How to Adjust Camber on Chevy Truck

Camber refers to the angle of the wheels relative to a vertical plane when viewed from the front or rear of the vehicle. Proper camber adjustment is crucial for ensuring good handling, even tire wear, and optimal performance of your Chevy truck. In this article, we will guide you through the step-by-step process of adjusting the camber on your Chevy truck.

Also read: how to start a 94 Chevy truck without the key

Table of Contents

Understanding Camber

Before diving into the adjustment process, let’s briefly examine what camber is and why it’s important. Camber is the wheel’s angle relative to the ground when viewed from the front or rear of the vehicle. When the top of the wheel tilts outward, it is said to have positive camber. When the top of the wheel tilts inward, it is said to have negative camber.

Proper camber adjustment is important because it affects several aspects of your vehicle’s performance, such as handling, tire wear, and fuel efficiency. When the camber is too positive or too negative, it can cause uneven tire wear, poor handling, and even reduced fuel efficiency.

Tools Required

Here are the tools you’ll need to adjust the camber on your Chevy truck:

  • Jack
  • Jack stands
  • Lug wrench
  • Camber gauge
  • Wrenches or sockets
  • Pry bar
  • Grease pencil

Also read: Will a Dodge Truck Cap Fit a Chevy?

Step-by-Step Guide to Adjusting Camber on Chevy Truck

Now that you have the required tools, here’s a step-by-step guide to adjusting the camber on your Chevy truck:

Step 1: Prepare your vehicle

Park your Chevy truck on a level surface and turn off the engine. Use the lug wrench to loosen the lug nuts on the front wheels.

Step 2: Jack up the truck

Use the jack to lift the front of the truck and place jack stands under the frame rails. Ensure the jack stands are securely placed before you start working on the vehicle.

Step 3: Remove the wheels

Use the lug wrench to remove the nuts and remove the front wheels.

Step 4: Locate the camber adjustment bolt

The camber adjustment bolt is located on the upper control arm. Use a wrench or socket to loosen the nut on the camber adjustment bolt.

Step 5: Adjust the camber

Use the camber gauge to measure the camber angle. If the camber angle is not within the manufacturer’s specifications, adjust the angle by turning the camber adjustment bolt with a wrench or socket. Use the grease pencil to mark the original position of the bolt before making any adjustments.

Step 6: Recheck the camber angle

Once you’ve made the necessary adjustments, recheck the camber angle using the camber gauge. If the angle is still not within the manufacturer’s specifications, make further adjustments until it is.

Step 7: Tighten the camber adjustment bolt

Once the camber angle is within the manufacturer’s specifications, tighten the nut on the camber adjustment bolt using a wrench or socket. Use the grease pencil to mark the final position of the bolt.

Step 8: Reinstall the wheels

Reinstall the front wheels and tighten the lug nuts using the lug wrench.

Step 9: Lower the vehicle

Use the jack to lower the front of the truck and remove the jack stands.

Conclusion

Adjusting the camber on your Chevy truck is a relatively simple process that can be done with basic tools. Proper camber adjustment is important for ensuring good handling, even tire wear, and optimal vehicle performance. Follow the steps outlined in this guide to adjust the camber on your Chevy truck and enjoy a smoother and more efficient